Skip to content

D-SUB breakout module to screw terminals

The modules convert D-Sub connectors to screw terminals. For simplified inventory, both D-Sub plug and D-Sub socket of the respective pin count are populated and connected in parallel. The terminals allow the required lines to be easily connected to existing fixed wiring. For control-cabinet installation, the module snaps onto standard DIN rails TS15, TS35, and G32.

Technical Data

General data

ParameterValue
D-Sub connectorPlug + socket
D-Sub lockingThreaded studs UNC 4-40
Terminal typeScrew terminals, 3.81 mm pitch
Conductor cross-section1 x 1.5 mm² (16 AWG) solid or stranded without ferrule,
1 x 0.5 mm² (20 AWG) with ferrule
Load rating125 VAC / 1 A
MountingSnaps onto DIN rail TS15 / TS35 / G32
Installation positionAny
Protection classIP00
Environmental conditions-5°C .. +65°C under normal installation conditions (in control cabinet). For outdoor use, suitable enclosures with protection from direct sunlight, frost, and condensation are required.
RoHS complianceCompliance with applicable regulations is observed. However, no in-house analyses are performed; reliance is placed on the corresponding declarations from suppliers.
ApprovalsCE
Scope of deliveryThe respective module
Customs tariff number85340090
OriginGermany

Variants

ParameterDSUB09MFTDSUB15MFTDSUB25MFTDSUB37MFTDSUB50MFT
D-Sub pin count915253750
D-Sub shellDEDADBDCDD
Terminal count10 (1-9, S)16 (1-15, S)26 (1-25, S)38 (1-37, S)52 (1-50, S, S)
Dimensions47.5 x 82 x 45 mm³47.5 x 82 x 45 mm³70 x 82 x 45 mm³81 x 82 x 45 mm³105 x 82 x 45 mm³
Weight0.075 kg0.082 kg0.112 kg0.135 kg0.165 kg
TechnologyStandard connector on 2-layer PCB.Standard connector on 2-layer PCB.Standard connector on 2-layer PCB.Standard connector on 2-layer PCB.Standard connector on 4-layer PCB.
EAN / UPC045635937451045635937468045635937475045635937482045635937499